Roof Overhang Calculator
Roof overhangs project beyond exterior walls to help direct water away from the building, provide shade, and protect wall assemblies. They also increase the roof’s overall footprint and material requirements. This calculator computes adjusted roof dimensions and added projected area from building length/width and overhangs on each side, supporting quick takeoffs and planning. For sloped surface area, combine the adjusted footprint with a pitch multiplier.
Different sides of a roof can have different overhangs (e.g., deeper eaves than rakes). By entering each side separately, you get a more accurate projected footprint than assuming a uniform overhang. Structural support, wind resistance, and detailing at fascia and soffit must be designed and built to code; larger overhangs may require additional framing considerations.
Formula
Adjusted Length = Building Length + Overhang A + Overhang B
Adjusted Width = Building Width + Overhang C + Overhang D
Base Area = Length × Width
Adjusted Area = Adjusted Length × Adjusted Width
Added Area = Adjusted Area − Base AreaOpposite overhangs extend each overall dimension. The adjusted footprint is the horizontal projection including those extensions. Added area quantifies the extra projected coverage due to overhangs.
Planning Impacts
| Area | Consideration |
|---|---|
| Materials | Increased sheathing and covering quantities. |
| Protection | Helps manage water at walls when detailed correctly. |
| Structure/wind | Must be supported and designed for local loads. |
Measure overhangs consistently (typically horizontal projection) and include related components like drip edge, fascia, and soffit ventilation in your project scope.
Frequently Asked Questions
Is this sloped area?
No, it’s projected (plan) area. Apply a pitch factor for sloped surface area.
Can sides differ?
Yes, enter each side’s overhang separately.
Do overhangs affect cost?
Yes, through added materials, framing, and detailing.
Are there limits on overhang size?
Limits depend on structure, wind/seismic design, and local codes; consult design professionals as needed.
Should gutters be included?
Gutters are separate; this calculates roof projection beyond walls.