Rainwater Collection Calculator
Rainwater harvesting can supplement non-potable water uses such as landscape irrigation, reducing demand on municipal or well supplies. The amount of water you can collect depends on catchment area, rainfall, and how efficiently the roof surface sheds water (runoff coefficient). This calculator estimates potential annual and average monthly collection volumes and suggests a planning-level storage size. Actual system design must account for rainfall variability, first-flush diversion, filtration, storage losses, intended use, and local regulations.
Not all rainfall becomes usable supply. Losses occur due to evaporation, splash, initial dirty runoff (first flush), leaks, and overflow. Smoother, impervious surfaces typically have higher runoff coefficients than rough or absorbent surfaces. Storage sizing should reflect demand patterns and dry periods, not just average annual yield.
Formula
Volume (gal) = Roof Area (sq ft) × Rainfall (in) × 0.623 × Runoff Coefficient
1 inch over 1 sq ft = 0.623 gallons
Average Monthly = Annual Volume / 12
Suggested Storage (planning) ≈ one month average (adjust for demand/dry periods)The constant 0.623 converts inch-feet of water over a square foot to gallons. Multiplying by area, rainfall depth, and runoff coefficient yields an estimated harvestable volume. Storage guidance is simplified; detailed design considers seasonal distribution and use requirements.
Runoff Coefficients (Typical)
| Surface | Coefficient |
|---|---|
| Metal | ~0.95 |
| Asphalt shingle | ~0.85 |
| Tile | ~0.80 |
| Green roof | Lower/variable |
Check local regulations before installing a rainwater harvesting system. Requirements for potable vs non-potable use, backflow prevention, and system components vary by jurisdiction.
Frequently Asked Questions
Can I use collected rainwater for drinking?
Only with appropriate treatment and where permitted by local regulations. This calculator does not assess potable water safety.
Why is the runoff coefficient less than 1?
Some water is lost to wetting, evaporation, and initial runoff that is typically diverted (first flush).
How big should my tank be?
It depends on rainfall patterns, demand, and desired reliability through dry periods. The suggested size here is a simple average-month estimate.
Does roof material affect water quality?
Yes. Roofing materials and debris influence collected water quality; proper filtration and intended use must be considered.
Is rainwater harvesting legal everywhere?
Regulations vary. Check local and state/provincial rules before installing a system.