Roof Solar Suitability Checker

Check roof solar suitability and estimate usable area and panel capacity based on area, orientation, pitch, shading, and location.

Result

Enter values and calculate to see results here.

Roof Solar Suitability Checker

Solar photovoltaic (PV) performance depends on available roof area, orientation, tilt, shading, and local solar resource. This checker provides a preliminary estimate of usable area, potential panel capacity, and indicative annual energy production to help you gauge suitability. It is not a system design or financial analysis; a qualified solar installer should perform a site assessment considering roof condition, structural capacity, electrical service, and local incentives/regulations.

Formula

Usable Area = Roof Area × Shading Factor × Orientation Factor
Panel Count ≈ floor(Usable Area / Panel Area)
System Size (kW) ≈ Panels × Watts per Panel
Annual Energy (kWh) ≈ kW × Peak Sun Hours × 365 × Performance Ratio

Shading and orientation reduce effective area. Panel count is estimated using a typical panel footprint, and energy uses a simplified production model with a performance ratio for losses. Actual output varies with equipment and conditions.

Suitability Factors

FactorPreferred
OrientationSouth-facing (in N. hemisphere) generally best
ShadingMinimal shading throughout the day
Roof conditionGood condition with adequate remaining life

Ensure the roof can support added loads and that replacement is not imminent before installing PV. Check utility interconnection and permitting requirements.

Frequently Asked Questions

Is my roof good for solar if it faces east/west?

East/west roofs can still be viable with somewhat lower production than optimal south-facing orientations.

How much shading is too much?

Significant shading can greatly reduce output. A site-specific shade analysis is recommended.

Does roof age matter?

Yes. Installing solar on a roof near end-of-life may require costly removal/reinstallation later.

Is this a production guarantee?

No. It is a rough estimate; actual production depends on system design and site conditions.

Do I need permits?

Most solar installations require permits and utility approval. Consult local authorities and installers.

References

Disclaimer: This tool provides planning estimates only, not a contract, guarantee, engineering determination, or professional advice. Verify measurements, local code requirements, material specifications, and safety conditions with qualified professionals before purchase or work.